Ziton ZR4ST-3 ZR4 Series 868 MHz Site Survey Tool for Wireless Installations
The ZR4ST-3 is a portable radio survey kit to assist in the validation of an 868 MHz wireless fire alarm system prior to installation. A site survey is always required prior to installation for all wireless devices to ensure full system operability after installation.
Operating Principle
Fire systems are often required in buildings where cable wiring presents a challenge because the fabric of the building, or where the interior design would be negatively affected by the use of cables. It could also be difficult to introduce cable runs into old buildings that were not designed with a modern cable infrastructure. It is in these architecturally sensitive buildings that wireless fire detection is ideal.
The ZR4ST-3 survey tool helps establish the viability of a wireless installation in such buildings by allowing a pre-installation survey to be conducted within the standard operating parameters of the system. The ZR4ST-3 confirms the signal strength at every desired location and helps with the overall system design by providing clear go, no-go location information.
The Range
A typical 868 MHz fire system may consist of:
Wired or wireless interface modules
Wireless fire detectors
Wireless notification devices
Wireless detector/notification device combinations
Wireless manual call points
Wireless input/output modules
All of these require validation for signal strength prior to installation.
Features
Self-monitoring
Proven technology
Uses 868MHz radio channels
Skip to content
