The Eaton EF-CBD130 is a conventional reflective optical beam smoke detector for use with the Eaton range of conventional fire alarm systems. It works on the principle of infrared beam obscuration: the detector sends an infrared beam to a reflector and signals the fire panel, through its fire and fault relays, when smoke obscures the beam.
It is ideal for high ceilings and wide open areas such as warehouses, large stores, shopping centres, leisure centres, exhibition halls, hotel lobbies, museums and prisons. A built-in laser pointer marks the exact position for the reflector, and a digital display shows the received signal strength so alignment is quick and accurate. It is certified to EN 54-12:2015 and LPCB listed.
Key features
- Single-ended design using a reflector
- Four selectable ranges covering 8 to 100 metres
- Three selectable sensitivity levels: 2.6dB, 3.8dB and 5.8dB
- Alignment aided by a built-in laser pointer and digital display
- Automatic compensation for dust contamination, positional movement and transmitter ageing
- Self-diagnosis of internal faults
- Fire and fault interface relays
- Red fire, yellow fault and green alignment LEDs
Technical specifications
-
Catalogue number: EF-CBD130
-
Standards: EN 54-12:2015; LPCB listed
-
Operating voltage: 20V to 28V DC
-
Current: Standby 23mA, commissioning 56mA, alarm 33mA
-
Range: 8-20m, 20-40m, 40-70m or 70-100m
-
Sensitivity: 2.6dB (high), 3.8dB (medium), 5.8dB (low)
-
Relay rating (fire and fault): NO/NC, 2.0A at 30V DC
-
Reset time: Less than 2 seconds
-
Operating temperature: -10°C to +50°C
-
Humidity: 0 to 95% RH, non-condensing
-
Ingress protection: IP30
-
Housing: ABS, white
-
Dimensions: 190.87 x 126.87 x 91.96mm
What's in the box
- Beam detector
- 4 x reflectors
- 1 x mounting bracket
- 2 x M4 pan head screws with washers
- 1 x opaque/translucent test material
- 1 x magnetic tool
