The Advanced SP-8629-00/D/FT is an EvacGo evacuation alert controller built on MxPro 5 panel technology, designed to follow the BS 8629 code of practice for evacuation alert systems used by fire and rescue services in buildings containing flats.
This version is supplied with 1 loop card (expandable to 4 loops) and a designated fault-tolerant network card, with no display, in a deep enclosure. Advanced notes that the SP-8629-BX Gerda outer enclosure is not required with this controller.
Key features
- Designed to comply with the BS 8629 code of practice
- Supplied with 1 loop card, expandable from 1 to 4 loops with additional MXP-568 loop cards
- Designated fault-tolerant network card fitted
- No display version
- Dual flash-based microprocessor technology
- Virtual screen for remote programming and servicing
- Programmed and serviced from a laptop using Advanced DynamixTools PC software
- Compatible with Apollo (XP95 / Discovery), Hochiki, Argus and AxisEN devices
- Fully compatible with MxPro 5 series CIE
Technical specifications
- Protocols (devices per loop): Apollo / Hochiki (126 / 127), Argus (240), AxisEN (240)
- Evacuation alert zones: up to 32 (EvacGo range)
- Loops: dedicated 1-4 loop controller (1 loop card supplied)
- Mains supply: 200-240 V AC 47-63 Hz (+10%, -15%), 1.4 A max
- Charger current: 2 A, temperature compensated
- Batteries: 2 x 12 V 4 Ah min to 2 x 12 V 17 Ah max
- Serial port: 1 x RS232; USB: 1 x type B for PC communication
- Event log: 5000 event and diagnostic + 500 fire
- Networking: MXP-509 fault-tolerant network card
- Optional: MXM-546 separate 45 Ah battery enclosure; MXP-501 remote battery temperature sensor
