The Eaton CFEAPULLKIT is a standalone emergency assist alarm kit for accessible (disabled) toilets, bathrooms and hotel rooms. It is a simple 2-wire system that contains everything needed to install a complete emergency assistance alarm, excluding cables and fixings. Pulling the cord lights the LEDs on the pull cord unit, cancel unit and over door indicator and sounds the buzzer in the over door indicator; the call is reset with the cancel button. The kit is designed to be installed to the recommendations of BS 8300 and Building Regulations Approved Document M.
Key features
- Complete kit including mains power supply
- Dual loop pull cord
- High output blue LED indication and buzzer to ensure a response
- High contrast labels and printing for increased visibility
- Tactile braille signage on the cancel plate for partially sighted users
- Quick and simple installation with limited cabling
- Can also provide the power supply and one set of devices when used with the CFEASL4 4-way indicator panel
Technical specifications
- Power supply: 240 V mains, fed from a switched fused spur (3 A) using 3-core cable of at least 1 mm²
- Device wiring: 12 V extra low voltage, minimum 2 core 0.4 mm² cable
- Mounting: surface; wall devices fit onto back boxes of the required depth
- Upper cord pull: 800-1000 mm above floor level; lower pull: 100 mm above floor level
- Operating temperature: -5°C to +40°C
- Humidity: 0-95%, non-condensing
- For indoor use in clean, dry locations
What's in the box
- CFEAPSU power supply unit
- CFEAPULL ceiling pull cord unit
- CFEARSP cancel (reset) button
- CFEAODI over door indicator
