The ECO1003 A is a conventional (non-addressable) photoelectric smoke detector from the System Sensor ECO1000 range. It uses an optical chamber combined with an ASIC to detect fires quickly and accurately, and works on both 12 V and 24 V DC systems.
An integral LED latches on to give a local alarm signal until the detector is reset by a short power interruption, and an optional remote LED can repeat the alarm. It can be alarm-tested remotely with the ECO1000RTU laser test unit.
Key features
- Low profile design
- Low current draw
- Automatic drift compensation
- Operates on 12 V and 24 V DC systems
- Remote alarm test feature
- Latching alarm LED with remote LED option
- Wide range of ECO1000 bases, including resistor, Schottky diode and relay bases
- Approved to EN 54-7:2000 (Amendment 1) and MED 96/98/EC
Technical specifications
- Operating voltage: 8 to 30 V DC (12/24 V DC nominal)
- Max. standby current: 60 µA at 24 V DC (25°C)
- Max. alarm current: 80 mA (limited by the control panel)
- Operating temperature: -30°C to +70°C
- Humidity: 0 to 95% RH (non-condensing)
- Height: 32.5 mm (plus 9.5 mm for standard base)
- Diameter: 102 mm
- Weight: 75 g (plus 45 g for standard base)
- Terminals: 0.4 to 2.0 mm²
- Material: ABS; colour approx. RAL 9016
