The XCL-LB-O2-RM is a VESDA Sensepoint XCL – Large Bore aspirated gas detector for oxygen (O2) (25.0% v/v (fixed)), with Modbus RTU output and two programmable relays. It fits in-line in a VESDA or other ASD large bore pipe network, so the same pipework provides multi-point gas sampling alongside smoke detection, and it integrates with BMS, fire panels, PLCs and HVAC systems.
Key features
- Inserted in-line into the ASD pipe network, using the pipe flow to deliver air samples from multiple sampling holes to the gas sensor
- Remote sampling lets the detector sit outside the protected zone for convenient service and maintenance
- Bluetooth interface pairs with the Sensepoint App for commissioning, diagnostics, configuration, calibration and bump testing
- Integral alarm status LEDs and gas port for bump test and calibration
- Field-replaceable gas sensor cartridge
- Modbus version integrates with Xtralis VSC and VSM4 for remote access to detector status; can network to the VESDA Sensepoint 301C Gas Controller for extra relay outputs
Technical specifications
- Part number: XCL-LB-O2-RM
- Gas: oxygen (O2)
- Range: 25.0% v/v (fixed)
- Output: Modbus RTU plus relays
- Supply: 24 V DC nominal (9 to 32 V DC) or 24 V AC (20 to 27 V AC)
- Dimensions (W x H x D): 113 x 113 x 59 mm
- Weight: 500 g
- Casing: polycarbonate; IP65, Type 4 (NEMA 250)
- Pipe compatibility: ASD pipe networks of 25 mm or 27 mm OD
- Relays: 2 configurable (alarm, fault), 24 V DC / 250 V AC, 5 A
- Terminals: pluggable rising clamp, 0.5 to 1.5 mm²
- Operating temperature: −20 to +50 °C; atmospheric pressure 90 to 110 kPa
- Approvals: EN/UL/IEC 61010-1, CSA-C22.2 No. 61010-1-12, CE (EN 50270), RED, FCC, Bluetooth SIG
- Replacement sensor: XCL-SC-O2
What's in the box
- Detector unit, pre-installed with sensor cartridge
- Flow cap
- 60° elbows
