The Xtralis VESDA Sensepoint XCL (XCL-VEA-CO-RM) is an aspirated carbon monoxide (CO) gas detector for the VESDA-E VEA micro bore aspirating smoke detection system, with Modbus RTU output and relays. VESDA Sensepoint XCL for VEA is inserted in-line in the VESDA-E VEA microbore tube network to add gas detection to the fire protection provided by the VEA.
Key features
- Carbon monoxide (CO) sensor, 300 ppm (adjustable 50-1000 ppm)
- Modbus RTU (RS-485) output plus 2 programmable relays
- Inserted in-line in the VEA microbore tube network, sampling remotely up to 100 m away
- Bluetooth 4.0 (BLE) interface for set-up and maintenance with the Sensepoint app
- Integral alarm status LEDs; factory calibrated
- Modbus version can be monitored in Xtralis VSC and VSM4, and networked to the Sensepoint 301C gas controller for extra relays
- Field-replaceable sensor cartridge (XCL-XRL-SC-CO)
Technical specifications
- Part number: XCL-VEA-CO-RM
- Gas / range: carbon monoxide (CO), 300 ppm (adjustable 50-1000 ppm)
- Output: Modbus RTU + 2 relays (24 V DC / 250 V AC, 5 A)
- Supply voltage: 24 V DC nominal (9-32 V DC Modbus) or 24 V AC 50/60 Hz nominal (20-27 V AC)
- Maximum power consumption (24 V DC, Modbus): 0.7 W (toxic); relays add 0.6 W total
- Tube compatibility: VEA 6 mm OD microbore tube via the flexible tubes supplied
- Dimensions (W x H x D): 113 x 113 x 59 mm
- Weight: 500 g
- Ingress protection: IP65, Type 4 (NEMA 250)
- Operating temperature: -20°C to +50°C; humidity 0-99% RH non-condensing
- Approvals: EN/UL/IEC 61010-1, CSA-C22.2 No. 61010-1-12, CE EMC (EN 50270), RED, FCC, BT SIG, UL2075 (CO and CH4), AS 1668.2
What's in the box
- Detector unit with pre-installed sensor cartridge
- Two cable glands
- Calibration/flow cap
- Flexible tube and tube clips for connection to VEA tubing
