Li-ion Tamer LT-ACC-HUB-PWR-HON Gen 3 Direct Power Hub

The LT-ACC-HUB-PWR-HON is the direct power hub for the Li-ion Tamer GEN 3 lithium-ion battery off-gas detection system. The hub starts the sensor daisy chain, providing power distribution and CANbus communication to the Li-ion Tamer sensors. It is powered from the same 12 V DC supply as the controller, which makes it the usual choice for smaller systems.

Key features

• Starts the daisy chain for Li-ion Tamer GEN 3 monitoring (LT-SEN-M3) and reference (LT-SEN-R3) sensors
• Accepts up to 12 sensors, of either type
• Powered directly through a 12 V DC terminal block (+12 V DC, -V DC, earth)
• Hub output port connects to an Ethernet switch or to the controller
• Supplied with a terminator for the last sensor in the chain
• On-board LEDs show normal operation and fault states
• Mounting holes at standard rack-unit spacing; optional DIN-rail kit LT-ACC-HUB-MKT
• Use only one hub type per controller: do not mix with the PoE hub (LT-ACC-HUB-POE-HON)

Technical specifications

• Input voltage: 12 V DC
• Power consumption (fully populated): 0.5 A (6.0 W at 12 V DC)
• Maximum sensors per hub: 12
• Power wiring: 16-22 AWG stranded copper
• Maximum cable lengths: Ethernet switch to hub 100 m; hub to first sensor 30 m; sensor to sensor 30 m; hub to last sensor 100 m
• Operating temperature: -10 to +50 °C
• Weight: 200 g

What's in the box

• 1 x Li-ion Tamer GEN 3 hub, direct power
• Terminator for the sensor chain