Advanced GO1+ Fire Alarm Panel - Grey (Apollo/Hochiki - 126/127 Addresses)

The Advanced GO1+ is a Go+ series single-loop addressable fire alarm control panel in grey, for Apollo (Discovery, XP95) and Hochiki (ESP) protocol devices, with a maximum of 126 addresses (Apollo) / 127 addresses (Hochiki). The Go series is designed for non-networked single-loop fire alarm systems, combining an ergonomic control layout with a high-resolution, high-contrast graphical LCD and tactile keypad for select-and-click programming.

Integral zonal LEDs give instant identification of alarm locations and help achieve BS 5839 compliance without the cost of a separate LED zone card. Cause-and-effect programming and trace diagnostics make it suitable for small to medium systems.

Key features

• Apollo (Discovery, XP95) and Hochiki (ESP) protocol support, up to 126 addresses (Apollo) / 127 addresses (Hochiki)
• Graphical LCD user interface with LED indicators and push buttons
• Integral 15 zone LEDs for BS 5839 compliance, plus 35 additional software indication zones
• Auto-learn, loop detection and on-board scope facility for installation and fault finding
• 500 fire + 5,000 general event logging with advanced diagnostics
• Two on-board sounder outputs and three on-board relay outputs
• Optional 3 monitored inputs/outputs for fire/fault routing (with P-Bus adaptor and routing card) for full EN 54 compliance when connected to an alarm receiving centre
• Dedicated USB Type B port for direct PC connection; programmable on site from the panel or with the PC Configuration Tool
• 'No hinge' removable door and hangable chassis for easier installation
• Meets EN 54-13 (2005) clauses 5.3.4.1 and 5.3.4.2 (partial open and short circuits)
• New PCB integrates control panel and peripherals on one board, for 9 times faster operation than MxPro 4

Technical specifications

• Protocol: Apollo (Discovery, XP95) and Hochiki (ESP)
• Maximum addresses: 126 addresses (Apollo) / 127 addresses (Hochiki)
• Number of loops: 1
• Loop current: 500mA max
• Number of fire zones: 50 max
• Sounder outputs: 2 x 1A programmable (1A total)
• Relay outputs: 3 x 1A 30V AC/DC (max) to 10mA 5V (min), programmable
• Auxiliary output: 24V DC, 100mA (with GOP-001 fitted)
• Display: White backlit 240 x 64 graphical LCD
• Programmable inputs: 1 x key switch, 1 x monitored
• USB: USB type B for PC connection
• Ethernet: 10-Base-T, 100-Base-T
• Event log: 5,000 events with diagnostics + 500 fire events
• Enclosure: Steel, IP30, RAL 7035
• Dimensions (H x W x D): 345 x 345 x 87mm
• Weight (excluding batteries): 4kg
• Cable entries: 14 x 20mm knockouts at top
• AC supply: 220-240V, 50-60Hz, 1.0A max
• Power supply: On-board 24V DC 1.5A high-efficiency off-line switched mode
• Battery capacity: 24V 4Ah (min) to 24V 7Ah (max), internal
• Charging current: 0.35A, temperature compensated
• Deep discharge cut-off: 19.5V
• Operating temperature: -5°C to 40°C
• Humidity: 95% RH max
• Approvals: EN 54-2:1997+A1:2006; EN 54-4:1997+A1:2002+A2:2006
• Options: GOP-001 P-Bus adaptor card; GOP-002 access enable key switch assembly; MXP-532 routing/protection interface; MXP-506 routing termination card