VESDA by Xtralis VIC-030 Multi-function Control Card with MPO

The Xtralis VESDA VIC-030 is the VESDA VLF Multi-function Control Card (MCC) with MPO. As well as extra relays and a monitored input for VESDA VLF (LaserFOCUS) detectors, it provides a Monitored 24 V Powered Output (MPO) to drive devices such as sirens or strobes while monitoring line integrity.

Key features

• Two additional relays, allowing all four VLF alarm levels to be reported on dry relay outputs
• Extra General Purpose Input (GPI) with line monitoring, e.g. for mains-fail or remote reset
• Quick and simple to install with out-of-the-box operation
• Diagnostic LEDs show card power, relay, GPI and communications status
• Fully compatible with VESDA VLF-250 and VLF-500 detectors
• Jumper selection between a third relay (Disabled/Standby) or the 24 V MPO
• Self-configuring GPI: disables the MPO or reports External Fault, depending on the jumper setting
• Approvals: EN 54-20, CE (EMC and CPR), AFNOR (not UL/ULC approved at this time)

Technical specifications

• Part number: VIC-030 (VESDA VLF MCC with MPO)
• Dimensions (LxWxH): 110 x 70 x 20 mm without ESD cover
• Power consumption: 1 W from the detector at 24 VDC (less than 42 mA)
• Relay outputs: 2 A at 30 VDC
• Terminals: 0.2–2.5 mm²
• Tested to -10 °C to 55 °C; detector ambient 0 °C to 40 °C; humidity 5–95% non-condensing
• Detector compatibility: VLF-250 and VLF-500
• MPO input supply: 24 VDC; MPO output current: 1 A maximum
• MPO input current: 100 mA more than the MPO output load
• EOL resistor (MPO and GPI): 2.7 kΩ

What's in the box

• Control card
• Interface cable
• Single screw
• Field wiring connectors
• Two End of Line (EOL) resistors