The C-TEC CFP702-4 is a 2 zone conventional fire alarm control panel from C-TEC's CFP Standard range, made by C-TEC in the UK. It is certified to EN54-2 and EN54-4 by the LPCB and to EN54-13 by Kiwa, and is fully compatible with C-TEC's ActiV conventional fire detectors, sounders and visual alarm devices. It comes in a plastic enclosure that can be surface or flush mounted without a bezel.
Key features
- Two detector zones and four conventional sounder circuits
- Integral 1.5A EN54-4/A2 switch mode PSU
- Intuitive interface with colour-coded buttons and combined keypad/keyswitch entry
- Engineering functions including zone test, coincidence (double knock), zone delays, non-latching zones and one-man walk test
- On-board fire and fault relays
- Two open collector outputs (remote and reset)
- 'Class change' and alert inputs
- Expansion for up to eight two-wire repeaters (one CFP761 network card per system) and optional CFP relay boards
- Space for two 12V VRLA batteries
- Low 25mA quiescent current
Technical specifications
- Approvals: EN54-2 & EN54-4 (LPCB); EN54-13 (Kiwa Telefication)
- Zones: 2 (max. 500m per circuit); up to 25 detectors, or 32 detectors/call points combined, per zone
- Call point resistor: 470 to 680Ω
- Sounder circuits: 4 (max. 500m each), 4 x 200mA (800mA total)
- End-of-line resistor: 6k8Ω
- Mains supply: 230V 50/60Hz, 350mA max.
- Internal power supply: 19V-28.5V (27V nominal); output current limited to 1.5A
- Batteries: 2 x 12V 3.2Ah VRLA in series (min. 1.2Ah)
- Relays: auxiliary fire and fault, volt-free single pole changeover, max. 1A at 30V DC
- Open collector outputs: reset and remote, max. sink current 30mA
- Auxiliary 24V output: protected by a resettable fuse
- Dimensions: 380mm (W) x 235mm (H) x 96mm (D)
- Flush mounting hole: 367mm (W) x 220mm (H) x 75mm (D); no bezel required
- Construction: plastic lid and base, RAL7035 textured; IP30
- Weight: 1.75kg (without batteries)
- Operating temperature: -5°C to +40°C, max. 95% relative humidity
