FFE Fireray 3000 Controller (3000-007 )

The FFE Fireray 3000 Controller (3000-007) is the low-level System Controller for the Fireray 3000 end-to-end infrared beam smoke detector. It is installed at an accessible height and connects to the receiver heads over a 2-wire interface. It can also power the transmitters, which reduces the number of power supplies needed.

An LCD interface handles commissioning, testing and maintenance, including sensitivity and time settings. Laser-assisted alignment can be started from the controller. One controller supports single or twin detector configurations, with separate fire and fault relays for each detector for connection to a fire alarm zone.

Key features

• Low-level controller with LCD display
• Supports one or two Fireray 3000 detectors
• Separate fire and fault relays per detector
• 2-wire interface between controller and receiver
• Optional powering of the transmitter from the controller
• Programmable sensitivity, fire threshold and delays
• Contamination compensation
• First-fix design and multiple cable gland knockouts
• Fireray 3000 approvals include EN54-12 and UL268

Technical specifications

• Part number: 3000-007
• Operating voltage: 12 to 36V DC ±10%
• Controller current (with 1 or 2 receivers): 14mA constant
• Fire and fault relay contacts: VFCO, 2A at 30V DC resistive
• Delay to alarm/fault: 2 to 30 seconds, in 1 second steps (typical 10 seconds)
• Response threshold: 35% to 60%, in 1% steps
• Laser time-out: 1 to 59 minutes, in 1 minute steps (typical 5 minutes)
• LED indication: red = fire, amber = fault, green = system OK
• IP rating: IP54
• Operating temperature (non-condensing): -10°C to +55°C (EN54); -20°C to +55°C (UL)
• Relative humidity: 93% (non-condensing)
• Housing material: UL94 V2 PC
• Dimensions: 124 x 203 x 71.5mm (H x W x D)
• Weight: 606g