Advanced QZXL-12HS QuickZone XL - 12 Zone panel (high spec)

The Advanced QZXL-12HS is a QuickZone XL 12 zone conventional / twin wire (Sav-Wire) fire alarm control panel, fitted with one standard and one high specification zone card. It has an integral power supply and space for standby batteries.

It is approved to EN 54-2 and EN 54-4 and supports a wide range of conventional fire detectors, including Apollo, Argus, Hochiki and Nittan. The high specification card adds two monitored sounder outputs, programmable switched negative outputs and a programmable relay.

Key features

• 12 conventional or twin wire zones (selectable by DIL switches)
• Two monitored sounder circuits as standard, plus two more from the high specification card
• Alarm load of 2.4A shared across all sounder outputs
• Fire and fault volt-free changeover relays, plus programmable relays and outputs
• Class change and alert programmable inputs
• Dependency modes A, B and C
• Test mode, with or without sounders
• Integral detector removal monitoring
• Supports up to 8 fully functional repeater panels
• Key switch or code entry for access level 2
• Integral 3A switch mode PSU with space for 2 x 7.0Ah batteries
• One-year warranty as standard

Technical specifications

• Zones: 12 (1 x standard and 1 x high specification zone card)
• LED indicators: 13 red (1 x fire, 12 x zonal), 1 green (power), 22 amber (12 x zonal, 10 fault and system)
• Controls: Colour-coded Resound, Silence and Reset buttons, 1-4 numerical buttons and Enter
• Sounder circuits: 2 monitored (1A resettable fuse), further 2 via high specification card
• On-board relays: 2 auxiliary clean changeover relays (1 fire, 1 fault), 3A max at 30V DC
• Mains supply: 230V 50Hz (+10% / -15%), 1.2A max
• Auxiliary supply: 28V DC 400mA continuous
• Battery capacity: 2 x 7.0Ah 12V SLA, internal (batteries not included)
• Charger current: 1.34A (27.0V DC at 20°C, temperature compensated)
• Networking: Fully functional repeater panels via plug-in communications PCB
• Enclosure: Lockable steel, IP30, RAL 7035
• Cable entries: 20 x top, 8 x rear, 4 x base (20mm knockouts)
• Dimensions (H x W x D): Back box 300 x 450 x 85mm; door 310 x 460 x 25mm
• Approvals: EN 54-2:1997 + A1:2006, EN 54-4:1997 + A1:2002 + A2:2006