The Fike FIK-IR3-HD-AS11 is a triple IR (IR3) optical flame detector with high-definition video output, for ultra-fast, reliable detection of all types of hydrocarbon fire, visible and non-visible, in all weather and light conditions.
The integral HD camera gives clear images of a fire event at up to 30 m and records video automatically, so responders can see the situation before entering the hazardous area. This version has M25 conduit openings.
Key features
- Triple IR (IR3) detection of hydrocarbon fires
- Ultra-fast mode detects fireballs or explosions within 40 ms
- Extreme sensitivity: detects a 0.1 m² n-heptane pan fire at up to 80 m
- 1.2 s detection of a 0.1 m² n-heptane pan fire at up to 15 m
- Automatic HD video recording of fire events (1 minute pre-event, 3 minutes post-event)
- Data/event logger records alarms, faults and other events in non-volatile memory
- Built-in test (automatic and manual) of window cleanliness and overall detector operation
- Window heater to prevent condensation and icing
- Tilt mount (FIK-TMO-S02, ordered separately) can be fitted above or below the detector
Technical specifications
- Part number: FIK-IR3-HD-AS11 (HD video output, M25 conduit openings)
- Detection: 40 ms for fast burst of explosion; 1.5 s for 0.1 m² n-heptane pan fire at 0 to 30 m; 4.1 s at 30 to 70 m
- Field of view (IR): 90° horizontal, 75° vertical
- Time delay: 0 to 30 seconds
- Built-in test: automatic or manual
- HD video: clear imaging of fire and people at 30 m; ONVIF Profile S
- Operating voltage: 24 VDC nominal (18 to 32 VDC)
- Current consumption: standby 180 mA; maximum 250 mA (including window heater)
- Outputs: volt-free relays rated 2 A at 30 VDC (alarm normally open, fault normally closed); 0-20 mA stepped current output; Modbus RTU on RS-485; Ethernet IEEE 802.3 10Base-T; composite video (NTSC or PAL)
- Conduit entries: 2 x M25 x 1.5
- Wiring: 12 to 20 AWG (2.5 to 0.35 mm²)
- Size: 200 x 130 x 130 mm
- Weight: detector (stainless steel) 4.4 kg; tilt mount 2.4 kg
- Operating temperature: -55°C to +75°C
- Humidity: up to 99% RH, non-condensing
- Ingress protection: IP66 and IP68; NEMA 4X and 6P
- Approvals: ATEX, IECEx and FM/FMC explosion proof; performance to ANSI FM 3260 and EN 54-10
- Warranty: 5 years
